Wednesday, September 28, 2016

Polymer Thick Film Design Guidelines For Flex PCB

Polymer thick movie (PTF) innovations have actually been utilized to make flexible circuits for many years. Several of the initial flex circuits generated in volume were used printed inks and also a stencil, which is from a 1946 magazine on printed circuit manufacturing. As a result of the distinct nature of the materials made use of, PTF PCB circuits have their very own, very specific design policies. As a screen printing-based innovation, the limits of design are impacted by a few variables, consisting of the processing properties and last conductivity of the ink utilized. There are additionally limits to the screen printing materials as well as processes made use of. While display printing will certainly stay a vital innovation for PTF, inkjet printing appears poised to replace the classic technique of display printing. The fragment dimension of the conductor material included in PTF inks (traditionally silver, but with other conductor products beginning line) and the polymer service provider’s rheology and circulation attributes will certainly establish the limits of display printing. Emerging nanotechnologies being put on conductive bit flex PCB fabrication show up poised to enhance conductivity, potentially unlocking for much wider usage of PTF modern technology in locations once scheduled for copper circuits. PTF circuits could execute fairly well in particular sorts of dynamic applications for which they are not generally thought about appropriate. Some experimenters have actually reported increases in conductivity with biking. PTF membrane buttons likewise prove to the effectiveness of PTF as a flex PCB innovation in the contact locations of dome switches.

CONDUCTOR WIDTH AND SPACING FOR PTF

Minimum conductor width and also spacing is taken into consideration to be roughly 375µm (0.015″). It is possible to create finer lines and spaces utilizing PTF inks, however conductivity could end up being a design performance problem. That said, conductivity of inks is enhancing, so it is worth getting in touch with the flex PCB manufacturer to see just what is brand-new.

CURRENT-CARRYING CAPACITY OF PTF

Silver-based polymer thick film inks, under regular conditions, can be expected to bring about 25% of the current of copper of flex circuits for equal line widths and nominal PTF ink thickness. Improvements are underway as well as some recommend that conductivity approaching that of copper metal is on the horizon. Conductivity worths are nominally 5 to 20 mohms/square/25 microns of ink thickness. Nonetheless, patent literary works records worths of 0.100 ohm/square/25 micron for cooper bits plated with silver. While ink prices can be high because of the cost of silver, the general processing cost ought to minimize the cost of possession. Treatment must be utilized when trying to lug greater currents with metal-filled polymers. Hot spots within the conductor/polymer matrix could trigger fast destruction of the conductor as well as potentially failure, for that reason, the operating temperature level of the circuit must not go beyond 90 ° C.

SCREEN PRINTED PTF RESISTORS

Screen printed resistors are incorporated right into lots of PTF circuit layouts. If utilized in a design, the resistors should be kept to a minimum of one or two base worths to help with handling. Normally, the resistors can be printed to ± 20% of value without trimming. Laser or mechanical cutting of the resistor can be utilized if tighter resistances are needed.

TERMINATION DESIGN CONCERNS FOR PTF CIRCUITS

The design policies for flexible circuits pads or lands for PTF circuits resemble those used for rigid printed circuitry boards. However, the discontinuation functions must be reviewed with the flex PCB manufacturer. While polymer thick film inks are not directly solderable, conductive adhesives can be use to surface place parts. Land design for surface mounting is similar to PCBs.

GET IN TOUCH WITH FINISH FOR PTF CIRCUITS

PTF flex PCB, such as those used for membrane switches, require edge calls that permit them to be connecteded into a connector or mated to one more surface. The surface of choice for PTF is frequently carbon. The thin graphite coating is both
reduced friction and also adequately conductive to lug power and also signals at the greater voltages generally made use of with PTF innovation.

No comments:

Post a Comment