PTF Process For Double-Sided Flex PCB

PTF has actually been used effectively to generate economical, two-sided flex pcb. Like single-sided flex pcb, screen printing of the circuit pattern is required. Through-hole connection is made by evaluating conductive inks with an opening in the base polymer film, typically with the assistance of a vacuum cleaner. Totally automated internet printing machines have been established to create PTF circuits in a reel-to-reel style.

PTF-COPPER HYBRID PROCESS

The PTF-copper crossbreed process has actually likewise been made use of in double-sided flex PCB manufacture. The procedure draws from PTF as well as standard print-and-etch technologies.

– Circuit pattern is printed and also etched on a single-metal layer flex pcb laminate.
– Opposite side is printed with conductive polymer ink.
– Ink travels through the holes making contact with the other side.

In such items, copper is made use of for divinity circuits as well as PTF traces for low-level, low-current signals as well as higher voltage degrees. While there are presently less suppliers of this modern technology, the method holds some guarantee as a remedy for a variety of reduced to mid-range products.

ROLL-TO-ROLL PROCESSING/h2 >
Roll-to-roll processing of flexible circuits is an extremely automated and cost-efficient method of oneand two-metal layer flex circuit manufacture. Since there are different methods to roll-to-roll handling, the equipment is frequently tailored to fulfill the needs of the client. Horizontal and upright web dealing with devices are available. An instance of a piece of vertical handling tools is received number 9-26. The chapter on Printed Electronics will check out roll-to-roll handling problems in more deepness.

Source from http://www.ifastpcb.com/blog/ptf-process-for-double-sided-flex-pcb/